PF-02·08Adriqa Perform · Training wear
Padded bench coat: Custom padded bench coat manufacturer for clubs, academies and gyms
The long padded coat for substitutes, coaches and staff on cold matchdays, roomy enough to go over a full kit.
- Fabric
- Polyester or nylon shell, synthetic fill
- Weight
- Fill 120–200 g/m²
- Fit
- Long, roomy cut that goes over kit
- Label
- Yours
- Minimum order
- Confirmed in your quote
01 — In short
What is a bench coat?
A bench coat, also called a stadium or sub coat, is a long padded coat worn by substitutes and staff. It reaches below the knee and is cut wide enough to wear over a kit and tracksuit.
02 — Full spec
The typical spec.
Every line is checked with you and written on your spec sheet before a sample is made. Change anything to suit your design, market and budget.
PF-02·08Typical spec
- Fabric
- Polyester or nylon shell, synthetic fill
- Weight
- Fill 120–200 g/m²
- Fit
- Long, roomy cut that goes over kit
- Hood
- Fixed hood
- Construction
- Quilted or smooth shell, fleece-lined hand pockets
- Trims
- Two-way zip, storm flap, inside pocket
- Personalisation
- Embroidered crest, club name on back
- Decoration
- Embroidered or printed crest, sublimation, heat-transfer initials
- Sizes
- Youth 6–14 years, adult XS–4XL
- Labels
- Fibre, care and origin labels set up for EU or US rules
- Minimum order
- Confirmed in your quote
- Made in
- Sialkot, Pakistan
03 — Choosing the fabric
Training fabrics compared.
Training wear is washed often and worn in all weather, so the fabric matters as much as the cut.
| Fabric | Typical weight | What it suits |
|---|---|---|
| Polyester interlock | 130–160 GSM | Smooth and light. Tees and drill tops. |
| Birdseye mesh | 120–150 GSM | Breathable for hot sessions. |
| Brushed polyester–elastane | 200–280 GSM | Soft inside and warm. Quarter-zips and pants. |
| Woven micro-fibre | 90–150 GSM | Light and quick-drying. Shorts and shells. |
| PU-coated polyester or nylon | 90–150 GSM | Waterproof shells and bench coats. |
Tell us the season and the climate your team trains in, and we suggest the fabric.
04 — Make it yours
Warm on the bench.
- Length: below the knee
- Hood: fixed and padded
- Two-way zip with storm flap
- Fleece-lined hand pockets
- Inside pocket
05 — Decoration
How your logo goes on.
Send your artwork and we suggest the finish that suits the design, the fabric and the quantity.
Sublimation
Best forFull designs, stripes, sponsors
Heat transfer
Best forPlayer names and numbers
Screen print
Best forSimple logos on larger runs
Embroidery
Best forCrests and coach wear
Silicone or 3D badge
Best forCrests with depth
06 — Selling in Europe, the UK or the US
Labels for your market.
Tell us where you sell and we set the labels up for that market. If you need lab test reports, ask in your enquiry and we confirm what is possible in your quote.
European Union
Fibre names and percentages on the label under Regulation (EU) No 1007/2011. Care symbols to ISO 3758 are standard. REACH limits certain substances in textiles, such as some azo dyes.
United Kingdom
Fibre composition labels under the Textile Products (Labelling and Fibre Composition) Regulations 2012, plus care symbols.
United States
Fibre content, country of origin ("Made in Pakistan") and your RN number or company name under the FTC textile rules, and care instructions under the FTC Care Labeling Rule.
Kids' sizes
Drawstrings in children's clothing follow EN 14682 in Europe. In the US, children's products need CPSIA tracking labels, and hood drawstrings on children's upper outerwear are treated as a hazard (16 CFR 1120).
Water-repellent finishes
The EU restricts some PFAS chemicals used in water-repellent finishes, and several US states, including California and New York, restrict PFAS in clothing. Ask for a PFAS-free finish for these markets.
07 — How ordering works
Brief, sample, then bulk.
Send your logo, colours, sizes and quantity for the padded bench coat. You get a written spec and quote, approve a sample, then your order is made, checked and packed under your label. Minimums and dates are confirmed in your quote.
How warm is a bench coat?
With 120–200 g/m² of fill it is warm for winter matches; more fill adds warmth and bulk.
Is it waterproof?
The shell is water-repellent; fully waterproof shells with taped seams can be quoted.
Can it carry sponsor logos?
Yes. Chest, sleeve and back areas are common.
More training wear
Other styles in the range.
All made by Adriqa Enterprises, so one enquiry can cover them all.
- PF-02·07Rain jacketWaterproof shell for wet sessions and the touchline.
- PF-02·09Padded giletSleeveless padded layer that keeps the core warm on the touchline.
- PF-02·01Training teeEveryday short sleeve top for drills, gym work and warm-ups.
- PF-02·02Long-sleeve training topLight long sleeve layer for cool mornings, on its own or under a jacket.
- PF-02·03Quarter-zip drill topThe classic drill top: fitted body and quarter zip, for warm-ups and coaching.
Start your order
Make it yours.
Send your logo, colours, sizes and quantity for the padded bench coat. We reply with questions or your quote.